Premium Offroad LED Lighting
  • 40 Watt Led Work Light NRO-SF40B Surface Mount - Flood Pair

    $239.99 $199.00

    NIGHT RIDER USA

    Led Work Lights

     

    Features:

    • Reflector Cup Patterns
    • Flood Beam Pattern
    • CREE XM-L 10w High Power Chips
    • 6,320 Lumens Single
    • 12,640 Lumens Pair
    • 50,000+ Hour Led Lifespan Guarantee
    • 9-36 Volt DC Input - Amperage 2.854 @ 12v - 1.422 @ 24v
    • 100% Optically Clear and Unbreakable GE Lexan Lens
    • Instant On/Off/No Warm-Up Required
    • Operating Temperature: (range from -40 ° to 293 ° Fahrenheit)
    • Dual-Oversized Heat Sink for Heat Dissipation
    • Ultra-Low Power Consumption Rating
    • Military Standard Breather / Gore Pressurized to Eliminate Condensation
    • Waterproof DEUTSCH Plug-N-Play Connector for Powering
    • Lifetime Warranty against Manufacturer Defect with Warranty Registration
    • 60-Day Money Back Satisfaction Guarantee
    • 6063 Cast Aluminum with a compressive strength of >205Mpa

    * Certifications and Testing: SAE, IP68, IP69k, RoHS, E-Mark, High / Low Temperature Barriers, High Pressure, Vibration, Salt and Fog, Sand and Dust.

    High Lumen Output, High Efficacy  

    XLamp XM-L LEDs offer the unique combination of very high efficacy at very high drive currents, delivering 158 Lumens per Watt efficacy at 3 A in a compact, 5-mm x 5-mm footprint. With its breakthrough light output and efficacy, the XM-L LED is designed for very-high-lumen applications such as high-bay, indoor commercial or roadway lighting. The XM-L LED can lower total system cost by reducing the number of LEDs and optics in the system.

    Usage: 

    Off Road, Snowmobile, Agriculture, Mining, Homeland Security, Police, Military / Defense, Watercraft, Powersports etc.

    What is the difference between 6061 and 6063 Cast Aluminum Housing?

     A majority of manufacturers use cast aluminum 6061 which has a compressive strength of = 124 MPa. Night Rider USA has introduced to the market a cast aluminum housing of 6063 with a compressive strength of >205 MPa = 29,732 Psi

    What does that mean? Our Led Work Lights are tested and proven to withstand greater than or equal to 29,732 psi (pounds per square inch of surface area). Comparable weight to several “Big Kahuna Monster Trucks” stacked on top of each other and dropped at the same time onto our Led Work Lights.

    Why do you need that kind of durability? First, one must evaluate the force created on impact of the average truck accident. Suppose the weight of the truck is 6,000 Pounds, corresponding to mass = 2,723.27 Kilogram = 186.61 Slugs, and the truck is traveling 15 Miles Per Hour, then an impact occurs that stopped the truck in a distance of 1 Foot (0.3048 Meters), then it would have an Impact Force (f) of 200,872 Newton (Force Measurement Unit) = to 45,160 Pounds. 

    Thus, we can state that an average truck wreck at 15 miles per hour creates an Impact Force (f) of 22.58 Tons. 

    IP68 / IP69k Waterproof Rating:

    * The Ingress Protection (IP) rating system is an internationally recognized scale that relates to proven protection against environmental factors such as liquids and solids.

    * Ingress protection ratings can be identified by the letters IP, followed by two numbers. These numbers define the amount of protection a digital scale has against specified elements and its ability to resist foreign matter that could otherwise get inside the 

    IP68:

    * 6:   Dust tight. No Ingress of dust.

    * 8:   Protected against submersion in Water Beyond 10ft.

    IP69k:

    * 6:   Dust Tight. No Ingress of Dust.

    * 9k: Protected against close-range high pressure, high temperature spray downs. 

    What are the advantages of IP69K?

    * In environments that instrumentation or equipment undergo a continuous amount of extreme environmental factors, such as the combination of water, chemicals, high pressures and temperatures, can prove fatal for electronic circuits and instrumentation. IP69k Certification is a guarantee the instrumentation can handle the forces and pressures specified below and conforms to the highest waterproof rating in the world. 

    How is the water intrusion test performed for IP68 and IP69k?

    * The water intrusion tests themselves are done by placing the product on a turntable with a rotational speed of 5 ±1 revolutions per minute. The product is then sprayed at close range at a rate of approximately 4 gallons/16 liters per minute with water pressure of between 1160-1450 psi, at a temperature of 176°F/80°C.

    * The nozzle from which the water is sprayed is held between 4 and 6 inches from the product, at a variety of angles. Following this rigorous testing procedure, the product is deemed as having successfully achieved the rating if it completely resists water ingress.

    Kit Contents

    * Led Work Light

    * Stainless Steel Mounting Bracket

    * Instruction Manual 

    * Warranty Registration Card – Must be Completed within 60 Days of Purchase


    Reviews